Overview of the AirGap solution and its functionality.
AirGap solution overview, including the isolated backup repository, security mechanisms, and replication process.
Learn how pre- and post-replication scripts are configured in Xopero ONE Management Service to automate and control replication workflows.


Learn how pre- and post-replication scripts are configured in Xopero ONE Management Service to automate and control replication workflows.
Xopero Unified Protection (XUP) leverages iDRAC for remote, automated management of the appliance. Integration with iDRAC enables execution of predefined scripts for power management and operational control, supporting reliable execution of replication jobs.
The Xopero AirGap solution is based on a cluster of two Xopero Unified Protection (XUP) devices (offline and online) connected directly in a back-to-back setup.
XUP online operates in a standard configuration: with (or without) an active XUP Management Service, a Xopero ONE backup agent, and data storage. XUP offline contains only the data storage (S3) and, optionally, the backup agent. The redundant device remains powered off and disconnected from the network most of the time, preventing any communication with it, and is powered on only for replication purposes.
To properly execute the replication job, every XUP device is equipped with an iDRAC to enable communication between two XUP devices. The iDRAC interface remains active at all times, as it is used to power the redundant (offline) device on and off. Predefined iDRAC scripts are responsible for controlling the replication process.
Below is the iDRAC scripts configuration menu in Xopero ONE Management Service (XMS), available during replication plan creation and editing in the Advanced settings section.
The iDRAC Power Up script is executed before the replication process starts and is responsible for powering on the redundant XUP device (XUP offline).
Username: the iDRAC username, which can be configured only during the initial setup by a dedicated Xopero support engineer.
IP address: the iDRAC IP address, which should point to the redundant XUP device. This value can be edited at any time — for example, if the network configuration changes and the iDRAC IP address needs to be updated.
Add new or select password from Password Manager: the iDRAC password, which can be configured only during the initial setup by a dedicated Xopero support engineer.
The iDRAC Power Down script is executed after the replication process completes and is responsible for powering off the redundant XUP device (XUP offline).
Username: the iDRAC username, which can be configured only during the initial setup by a dedicated Xopero support engineer.
IP address: the iDRAC IP address, which should point to the redundant XUP device. This value can be edited at any time — for example, if the network configuration changes and the iDRAC IP address needs to be updated.
Add new or select password from Password Manager: the iDRAC password, which can be configured only during the initial setup by a dedicated Xopero support engineer.
AirGap solution overview, including the isolated backup repository, security mechanisms, and replication process.
Xopero Unified Protection includes an AirGap solution designed to enhance data security. This functionality is based on the physical isolation of the backup repository from the network, helping to minimize the risk of data breaches, for example those caused by ransomware attacks. The AirGap architecture ensures that backup data remains inaccessible to entities operating within a compromised IT environment. By combining strict access control with automated backup processes, the solution increases infrastructure resilience and provides a foundation for a secure disaster recovery strategy.
The Xopero AirGap solution is a data protection method that uses xSAIR (Secure AirGap Immutable Repository) technology to create an isolated backup environment and store an additional backup copy fully separated from the primary network.
AirGap is based on a cluster of two Xopero Unified Protection (XUP) appliances connected in a back-to-back configuration, where the second, redundant device remains disconnected from the network most of the time, preventing any communication with it. The redundant device is powered on only for replication purposes.
The replication process is initiated by powering on the inactive XUP appliance via iDRAC (Integrated Dell Remote Access Controller). After data transfer is completed, the system automatically powers the device off, restoring the isolated AirGap state. Due to its physical disconnection from the network, the backup copy stored on the isolated device remains inaccessible to cyber threats, providing effective protection against ransomware attacks.
The AirGap system is based on communication between two interconnected XUP devices — offline and online:
XUP offline device remains powered off most of the time. It includes only data storage and, optionally, a backup agent. The device is equipped with an active iDRAC interface used for remote startup and shutdown.
XUP online device can operate in one of two variants:
Standard — includes an active management interface, a backup agent, and data storage.
Limited — does not include the management interface; it contains only the backup agent and data storage.
The AirGap data replication process is fully automated, eliminating the need for manual intervention to maintain physical separation of resources. The system manages the connection state of the backup repository, enabling access only during data transfer and isolating it immediately afterward.
The AirGap component integration process follows these principles:
The XUP online unit connects its backup agent and data storage to the management service (hosted on a XUP device, external server, or SaaS).
The data storage of the XUP offline unit is then connected to the management service via backup agent installed on the XUP online device.
Data replication is performed through a task executed by the backup agent on the XUP online device.
To ensure unattended communication with the offline device, the process uses event-driven scripts:
PRE script — executed before the data replication process begins. It powers on the XUP offline unit via the iDRAC interface and waits until it is fully operational.
POST script — executed immediately after the replication task is completed. It safely powers off the XUP offline unit using the iDRAC interface.
Script arguments — should remain empty; can be configured only during the initial setup by a dedicated Xopero support engineer.
Additional script options, which include how the replication task execution should be handled in the event of a script failure. These values can be modified at any time; however, changing them is not recommended.
Script arguments — should remain empty; can be configured only during the initial setup by a dedicated Xopero support engineer.
Additional script options, which include the ability to configure the script waiting interval before continuing the replication task. These values can be modified at any time; however, changing them is not recommended.

